thingaby wrote:
Martin. I've bought one of your bags for my r300 through E-bay. It seems a simple and neat system. As a complete novice I need advice on how to access the waste tanks and hook it up etc. I've read your guidance about positioning the bag on Ebay. Also very helpful. Can you help or point me in the right direction?
atb steve
thingaby wrote:
Job done in 7 minutes. And I've seen it work. remarkable. many thanks for the help.
Quote:
While I think about it. I helped my mate install CIS for his Brother 215c. Do you know if there a waste ink tank solution for that model as well?
Quote:
1. Press and hold 'stop' 'maintenance' and 'power' buttons for about 10 seconds, a message will come on the screen saying counter is reset and to turn off.
2. Turn your printer off and then back on - job done.
3. When resetting the counters you should really replace the waste ink pad but can get away with removing the pad then washing it out and allowing it to dry before putting it back into the printer.
output generated using printer-friendly topic mod. All times are GMT + 1 Hour